Tag Archives: Curtis Ness

Organizing a CROCT group ride: my first attempt

I polled our CROCT ridership last month, asking them to indicate which weekend days in Feb. would work for them to participate in a group ride along MORC’s Minnesota River Bottoms trail in Bloomington. I announced the results and the plan on the CROCT blog.

Yesterday, ten of us showed up at 1pm at the Lyndale Ave/I35W trailhead.

Curtis Ness, Michael Lehmkuhl, Joe Thorman, JC Ingebrand, Dave Wolf, Bill Nelson, Gary Duden, John Rinn, Scott ParkerThe group photo in the parking lot was taken by Pat Sorenson,  president of Penn Cycle who happened to be heading out on a ride with some buddies at the same time.

We opted to ride 8 miles west to the Bloomington Ferry Bridge (Hwy 169) trail head since several of the group had never ridden that route. Continue reading Organizing a CROCT group ride: my first attempt

Salsa Cycles demo gets me thinking about my next three bikes

Rule #12 of the Velominati’s The Rules, is:

The correct number of bikes to own is n+1.

While the minimum number of bikes one should own is three, the correct number is n+1, where n is the number of bikes currently owned. This equation may also be re-written as s-1, where s is the number of bikes owned that would result in separation from your partner.

I just have one bike, not counting my trials motorcycle which I’m planning to sell Real Soon Now so as to help me with the s factor in the above equation.  I’m not yet shopping but I am ruminating.

Having ridden mototrials for years, I’m naturally interested in a trials bicycle.  Living in Minnesota, I’m naturally interested in a fat bike for winter riding.

But after my experience of enduro riding in Duluth in June, I’m now really interested in the gravity-related categories of mountain biking, especially since I have two places within 35 minutes to practice jumps (Lexington Ave. Pump and Jump Park and Lebanon Hills), and a couple of downhill runs 45 minutes away at the Memorial Trail system in Red Wing.

So with gravity weighing on my mind, I went to the Salsa Cycles demo last night at the Carver Lake Off-road Cycling Trail in Woodbury.

Salsa Cycles demo at Carver Lake Park John Gaddo and Paul Lehrer Griff Wigley, John Gaddo

QBP Outside Sales Reps for the Upper Midwest, John Gaddo and Paul Lehrer, fixed me up to demo a Salsa Horsethief which the promo lit says:

… is our full-suspension 29’er trail bike, designed for all-day riding on rugged terrain. A very capable climber, Horsethief does have a slight bias toward descending, letting you enjoy the fruits of your uphill labor. By designing the bike for use with a shorter than normal stem, the body is positioned better for aggressive riding.

rock garden at Carver Lake Park log skinny at Carver Lake Park rock garden at Carver Lake Park
I knew there wouldn’t be any rugged downhill terrain at Carver so I was content to test it on the rock gardens and skinnies. Never having ridden a full-suspension bike before, I was wondering if the Horsethief would allow me to do what I can do with my X-Caliber hardtail on the tougher technical stuff.  It handled it easily.  And I did notice that I could ride a lot faster through the rock gardens, rather than picking my way slowly, trials-style. Cool. Would the Horsethief be enough to handle the downhill runs at the Copper Harbor Ride Center and similar parks? I suspect so.

Logan Macrae, Mark Witt, Curtis Ness Owen Mibus, Ben Witt, Myrna Mibus
Fellow Rice County residents  were well-represented at the event, including the gang from Milltown Cycles in Faribault and some of their regular customers. Left photo: Logan Macrae, Mark Witt, Curtis Ness. Right photo: Owen Mibus, Ben Witt, Myrna Mibus. Not shown: Jim Fisher and his daughter Amy.

‘Reveal the Path’ world premiere: adventure by bike

Reveal the Path at the Riverview Theater  Reveal the Path at the Riverview Theater  Reveal the Path at the Riverview Theater  Reveal the Path at the Riverview Theater
Robbie and I attended the world premiere of Reveal the Path at the Riverview Theater in Minneapolis last night, along with a few hundred other bike nuts:

Reveal the Path, Presented by SalsaA visually stunning adventure by bike: Reveal the Path explores the world’s playgrounds in Europe’s snow capped mountains, Scotland’s lush valleys, Alaska’s rugged coastal beaches and Morocco’s high desert landscapes…

Filmed across four continents and featuring Tour Divide race legends, Matthew Lee & Kurt Refsnider, this immersive film is sure to ignite the dream in you.

Andy Palmer (background) and John Gaddo Andy Palmer John Gaddo, Jason Boucher
Luminaries from QBP and its Salsa Cycles division, the main sponsor of the movie and the event, were on hand. They were marginally adequate as movie theater attendants:

Left: John Gaddo, QBP Outside Sales Rep
Center: Andy Palmer, Salsa Customer Service
Right: John Gaddo and Jason Boucher, Salsa General Manager. See Jason’s ImagineGnat blog ("Bicycles – Photography – People – Exploration")

Curtis Ness, Ben Witt, Mike “Kid” Riemer Ben Witt; Myrna Mibus Mike Dion, producer and director of Reveal the Path
Some other bike nuts at the schmooze fest in the theater lobby:

Left: Curtis Ness and Ben Witt, Milltown Cycles, with Mike “Kid” Riemer, Salsa Marketing Manager.
Center: Ben Witt with Mryna Mibus, blogger, freelance writer, and future mountain biker who was there with her husband Owen and kids.
Right: Mike Dion, producer and director of Reveal the Path and its predecessor Ride the Divide.

See the large slideshow of 17 photos (recommended) or SLOW CLICK this small slideshow:

The mountain bike trails at the River Bend Nature Center in Faribault

Last week I went for a night ride from downtown Faribault to the nearby River Bend Nature Center (RBNC). Earlier this year I rode a few of the trails at RBNC but mainly the wide, well-traveled ones.  I didn’t really see it as a good place for mountain biking. But I was wrong.  I rode a single track trail to get to RBNC that was very fun, even though I only had a weak handlebar light.  And once there, I discovered many other fun single tracks that I had no idea existed.

So I went back this week in the daylight to get a better idea of what I’d just experienced.  (My apologies for the semi-lousy photos. I took them with my smartphone.)

IMG_20120102_163130 IMG_20120102_163232 mountain bike trails at River Bend Nature Center
The best mountain bike trail from downtown to RBNC begins at the eastern edge of Teepee Tonka Park, underneath the Hwy 60 viaduct that crosses over the Straight River at the southeast corner of downtown Faribault. There’s another route, the recreational trail that begins at the southern edge of the park on the west side of the river but if you take that, you’ll miss the fun stuff.  See this City of Faribault Parks and Trails map (PDF) for more detail.

Right photo above: within a few yards, you have the option of taking the lower trail that goes along the river (intermediate difficulty) or the upper trail along the bluff (advanced/expert).

mountain bike trails at River Bend Nature Center IMG_20120102_163726 IMG_20120102_163934
The lower trail has several well-constructed bridges over the creek beds.

mountain bike trails at River Bend Nature Center IMG_20120102_164355 IMG_20120102_164550
The lower trail has the potential for lots of technical areas, with many logs and rocky creek beds.  I say ‘potential’ because with a few exceptions, the technical stuff is in ‘raw’ form, ie, not constructed to make it rideable or interesting for most riders.

mountain bike trails at River Bend Nature Center IMG_20120102_162555 IMG_20120102_162155
The upper trail has some fun ups and downs, and is solidly constructed with rocks and logs along the steeper parts to prevent erosion. While not too difficult technically, the trail is narrow in many places, along some steep drop-offs and thus would be a little freaky for an intermediate rider.

tunnel along the mountain bike trails at River Bend Nature Center IMG_20120102_163920 IMG_20120102_163717
There are some fun tunnels to explore.

Next time out, I’ll try to find more of the single-track trails in the heart of the park.  But I’m thrilled to find out how much RBNC has to offer, as it’s only 15 minutes from my house in Northfield.

Update 9:40 PMA screengrab of part of the RBNC map with indicators in yellow where the trails start at the north end of the park.

Correction April 13:  the yellow arrow now indicates where the River Bend property line is. I’ve added a purple arrow to indicate where the single track trail actually begins.

 

 

Why I didn’t buy my mountain bike from Milltown Cycles

Robbie Wigley with her new Trek 7300 WSD from Milltown Cycles, somewhere on the Sakatah TrailRobbie bought her new hybrid bike (Trek 7300 WSD) at Milltown Cycles a month ago and was pleased with the advice/treatment she got from owner Ben Witt and manager Curtis Ness. The day she purchased the bike, we couldn’t wait for them to assemble it as we were due to meet some friends at the Cow.  No problemo. Curtis delivered it to our table.

So after I spent a weekend at the Cuyuna Lakes Mountain Bike Festival trying out mountain bikes, I spent an hour with Ben at my morning office at the Blue Monday, talking pros and cons of all the possible variations of which mountain bike to buy, given my price range, riding ability, planned use, etc.  His recommendation: a 29er hardtail, the Gary Fisher X Caliber.  I told him to order it and promptly tweeted the news.

A couple hours later, I got an email from Ben (he also uses Google Talk/IM which I found to be very helpful):

I hate to say it, but I can’t get that bike for you.  They are sold out for the year, and they don’t list an estimated time of arrival for the new 2012 models.

He then recommended that I get the bike from a competitor, Penn Cycle in Bloomington, which did have one in stock in my frame size:

I’m sorry to have that as the only option I can offer.  There are not many bikes that are similar to that to offer as alternatives.  I think you’d be very happy on that bike, and we can easily get the tires, pedals and other accessories here for you.

Ben Witt and Griff Wigley with a Gary Fisher X Caliber at Milltown Cycles in Faribault, MNBen Witt and Griff Wigley with a Gary Fisher X Caliber at Milltown Cycles in Faribault, MNWhaaaa?  Couldn’t he could sell me another bike in that price range with similar features? I wanted to buy a bike from him.

He was adamant. The X Caliber was the bike that was best for me and it made no sense to wail till fall to get one.  He was confident I’d be a long-term customer of Milltown Cycles and that he’d make a fair profit from whatever accessories, parts, and service I’d need.

I got my bike later that day.  And a few days later, he outfitted it with Eggbeaters and tubeless tires. Watch out, Hans Rey.